• Skip to main content

machinescraft.com

  • Machine Types
    • Sewing
    • Embroidery
    • Rowing
    • Espresso
    • Screen Printing
    • Spray Tan Machine
    • Microcurrent
    • Tennis Ball
    • Skin Tightening Machine
    • Nespresso
  • How to
  • Contact Us

How to Change a Sewing Machine Needle

By Mark Edwards

Contents

  • 1 Chose the  right size and material of the needle:
  • 2 Position the needle:
  • 3 Tighten the screw:
  • 4 When to change needle of your sewing machine:
  • 5 Conclusion:
Sharing is Caring

 

 

Almost all the families, whether they are modern or traditional, have a sewing machine. It is considered a conventional household device, the same as many other essential appliances that we have in our homes. In your machines start fiving you tangled stitches, then it’s time to change needle of your sewing machine. If you face this issue, change the needle of your sewing machine. Otherwise, it reduces the overall performance of your machine

If you are working on a project, it is better to use needle after every 24 hours for getting elegant and neat stitches. In this article, we will provide you with a complete guide on How to change a sewing machine needle.

Below are the steps that you need to follow for changing needle of your sewing machine:

Chose the  right size and material of the needle:

Chose the right size and reliable material needle; this is an important or increasing performance of the machine. There are many sizes available for different machines. In addition, quality of the needle also matters a lot chose finer needle material. The size of the sewing  machine needle is mentioned on the machine manual, or you can also find it written at the back of the machine.

Position the needle:

Position of your needle must be accurate. Flattened part of the needle must point up toward the clamp, and the pointed part must point towards machine’s base. Push the needle inside clamp of your sewing machine. Hold it using your hand. In the end, again place the screws to their place using a screwdriver.

Tighten the screw:

It is essential to tighten the screws correctly to avoid problems. The reason is the loose grip of the needle affects the stitches. Moreover, the needle got stuck into the fabric.

Caution:

  • Make sure that you turn off your sewing machine before changing the needle.
  • It is important to turn handwheel before removing or holding screw. The handwheel raises the needle in a position where you can easily change it. However, for newer versions of the machine, there is no need to turn the wheel. Older traditional machines have a wheel to move the needle up and down.

That’s all you need to do to change the needle. Discard the needle after changing.

You may also visit:

Best Embroidery Machine for Custom Designs
Best Embroidery Machine
Best Microcurrent Machine for Estheticians

When to change needle of your sewing machine:

Needles need to be changed regularly depending on your sewing style and how often you are sewing. We recommend that you use a new needle for each new project you tackle, or when you start sewing a distinctly different material that has special needle needs, such as leather or something stretch. Failure to change your needle can result in broken threads, bumps or uneven stitches, or even plucked or damaged material.

Conclusion:

That’s all you can now change the needle of your sewing machines easily. A fresh, sharp needle will enhance your stitches and make your sewing look from the front. In this post, we will discuss when and how your sewing needs to change.

Related Posts:

  • How to Oil a Sewing Machine?
    How to Oil a Sewing Machine?
  • How does a Sewing Machine Works?
    How does a Sewing Machine Works?
  • How to Use a Handheld Sewing Machine?
    How to Use a Handheld Sewing Machine?
  • How to put bobbin in sewing machine
    How to put bobbin in sewing machine
  • Affiliate Disclosure
  • Contact Us
  • Privacy Policy
  • Disclaimer

Copyright © 2022 · machinescraft.com ALL RIGHTS RESERVED.